Name Description/Format
Leica Integrated
Solutions Configu-
ration Manual
In order to operate the system in auto-
mation applications all instructions
required are contained in the Integrated
Solutions Configuration Manual. Pro-
vides an overview of Automation prod-
ucts together with technical data and
safety directions.
ü ü
T‑Scan Collect Ref-
erence Manual
Software Interface Reference Manual,
contains instructions for setting up and
operating the product.
–
ü
Refer to the following resources for Absolute Tracker and T‑Products
documentation/software:
•
http://www.leica-geosystems.com/metrology
Your feedback is important as we strive to improve the quality of our docu-
mentation. We request you to make specific comments as to where you
envisage scope for improvement.
Use the following e-mail address to send your suggestions:
support.ims@leica-geosystems.com
Leica Geosystems AG
Metrology Division
Moenchmattweg 5
5035 Unterentfelden
Switzerland
Phone +41-62-737 67 67
Fax +41-62-723 07 34
http://www.leica-geosystems.com/metrology
Feedback
Contact
3
To Next Page
Loading...
