Leister Hot-Jet S User Manual

1
LEISTER Hot-Jet S
Hot Air Welding Tool
Please read operating instructions carefully
before use and keep for further reference.
• Soldering and de-soldering of SMD thru-hole components.
• Welding of thermoplastic materials and also single-ply flexible plastics and
modified bitumen in the form of boards, tubes, profiles, lining membranes,
coated materials, films, foams, tiles, and sheets. The following procedures
are possible: overlap welding, welding with rod, with tape and fusion
welding by heat.
• Shrinking of heat-shrink sleeves, films, tapes, solder sleeves and moulded
parts.
• Activating/dissolving of solvent free adhesives and fusion adhesives.
• Drying of water-damp surfaces.
GB
OPERATING INSTRUCTIONS
APPLICATION
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/Switzerland
Tel. +41- 41 662 74 74 Fax + 41- 41 662 74 16 www.leister.com sales@leister.com
®

Leister Hot-Jet S Specifications

General

Brand	Leister
Model	Hot-Jet S
Category	Welding System
Language	English

Summary

Product Application

Safety Information

Warnings

Critical safety warnings regarding danger to life, fire, explosion, and burns during operation.

Cautions

Important precautions for voltage matching, GFCI/RCCB connection, supervision, and protection from moisture.

Technical Specifications

Approval Marks

Details of CCA certification and electrical safety classification.

Technical Data

Key technical data including voltage, power, temperature, airflow, pressure, noise, weight, and size.

Tool Description and Usage

Tool Components

Identification and description of the tool's parts and accessories.

Operating Conditions

Instructions on connecting the tool, adjusting settings, and warming up.

Operation and Nozzle Change

Guidance on tool operation, training courses, and safe nozzle replacement procedures.

Maintenance, Service, and Guarantee

Maintenance

Recommendations for cleaning the air filter and welding nozzle.

Accessories

Guidance on using only LEISTER-approved accessories.

Service and Repairs

Information on carbon brush checks, authorized repairs, and repair service guarantees.

Guarantee and Liability

Conditions for guarantee, liability, and policy on tool alterations.