Leister Uniplan E User Manual

1
LEISTER Uniplan E
Automatic hot air welding machine
Read the operating instructions carefully before use and
keep for future reference.
GB
OPERATING INSTRUCTIONS
LEISTER Uniplan E
Overlap Automatic Welding Machine
• Overlap and tape welding of coated fabric covers, foils and sealing membranes
made of PVC-P, PE, ECB, CSPE, EPDM, PVDF etc. as well as PE coated tape fabric
for lorries, tents, agricultural covers, building trade, biotopes, swimming pools,
marquees, boat covers, inflatable boats, advertising hoardings etc.
Welding seam width 20 or 30 mm
APPLICATION
®
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/Switzerland
Tel. +41 41 662 74 74 Fax +41 41 662 74 16 www.leister.com sales@leister.com

Leister Uniplan E Specifications

General

Brand	Leister
Model	Uniplan E
Category	Welding System
Language	English

Summary

APPLICATION

WARNING

CAUTION

Technical Data

TOOL DESCRIPTION

Main Components

Lists and identifies the primary structural parts of the welding machine.

Operating Components

Identifies controls and interfaces used for operating the welding machine.

Steering Equipment

Details parts related to guiding and maneuvering the welding machine.

Automatic Drive

Description of the automated drive system components.

OPERATION

Operational Condition

Checks and initial settings required before starting the welding process.

Tool Positioning

Guidance on how to place the welding machine correctly on the material for welding.

Welding Parameters

Settings for welding speed, air flow, and temperature.

Welding Process

Step-by-step guide for executing the welding procedure.

Accessories

Training

Maintenance

Service and Repair

Guarantee and Liability