BA Uniplan E /09.02
• Only LEISTER accessories should be used.
• Additional weight with holder
• LEISTER Process Technologies and its authorised Service Centres offer free wel-
ding courses and training.
• Clean the tool's air filter (13) with a brush when dirty.
• Clean welding nozzle (4) with wire brush.
• Check mains cable (1) and plug for electrical and mechanical damage.
• Have your Service Centre check the motor brushes after about 1,000 hours of
operation.
• Repairs should only be carried out by authorised LEISTER Service Centres. They
guarantee a correct and reliable repair service within 24 hours, using original
spare parts in accordance with the circuit diagrams and spare parts lists.
• Guarantee and liability are in accordance with the guarantee certificate as well
as with the currently valid general business and sales conditions.
• LEISTER Process Technologies rejects any guarantee claims for tools which are not
in their original condition. The tools must never be altered or changed.
Technical data and specifications are subject to change without prior notice.
Your authorized Service Centre is:
GUARANTEE AND LIABILITY
SERVICE UND REPAIR
MAINTENANCE
TRAINING
ACCESSORIES
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/Switzerland
Tel. +41 41 662 74 74 Fax + 41 41 662 74 16 www.leister.com
sales@leister.com
6
®
To Next Page
Loading...
