BA Uniplan S / Unifloor S / 11.02/GB
• Only LEISTER accessories should be used.
• Additional weight with holder for Uniplan S
• Welding rod de-reeler for Unifloor S
• Lifting device for Unifloor S
• LEISTER Process Technologies and their authorised Service Centres offer welding
courses world-wide free of charge.
• Clean the tool's air filter (12) with a brush when dirty.
• Clean welding nozzle (4) with wire brush.
• Check mains cable (2) and plug for electrical and mechanical damage.
• Have your Service Centre check the motor brushes after about 1,000 hours of
operation.
• Repairs have to be carried out by authorised LEISTER Service Centres only. They
guarantee, within 24 hours, a correct and reliable repair service using original
spare parts in accordance with the circuit diagrams and spare parts lists.
• Guarantee and liability are in accordance with the guarantee certificate as well
as with the currently valid general business and sales conditions.
• LEISTER Process Technologies rejects any guarantee claims for tools which are not
in their original condition. The tools must never be altered or changed.
Technical data and specifications are subject to change without prior notice.
Your authorized Service Centre is:
GUARANTEE AND LIABILITY
SERVICE AND REPAIR
MAINTENANCE
TRAINING
ACCESSORIES
®
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/Switzerland
Tel. +41 41 662 74 74 Fax + 41 41 662 74 16
www.leister.com sales@leister.com
8
To Previous Page
Loading...
