Need help?Do you have a question about the Leister WELDPLAST S1 and is the answer not in the manual?
General| Power | 1600 W |
|---|---|
| Temperature Range | 20°C - 650°C |
| Weight | 2.8 kg |
| Voltage | 230 V |
| Material | Plastic |
| Welding System Type | Hot air welding system |
Lists crucial safety warnings regarding electrical hazards, fire, and burns.
Provides essential precautions for voltage, residual current, eye safety, and unattended operation.
Explains the keys and functions of the device's operating unit.
Guides on selecting predefined or user-defined welding profiles.
Describes the process of saving custom welding profiles.
Indicates pending warnings and how to access more details.
Illustrates navigating the profile selection menu.
Detailed instructions for the welding process.
Highlights critical safety points during the welding process.
Details adjusting output volume and its relation to filler rod thickness.
Explains adjusting plasticizing temperature.
Explains adjusting air temperature.
Explains adjusting air volume.
Explains how to monitor and interpret temperature deviations during welding.
Describes device behavior after power interruptions.
Detailed steps for setting parameters, naming, and saving a new profile.
Details specific warnings like "Check Drive Brushes".
Explains error codes for overheating and faulty heating elements.
Lists errors requiring contact with the service center.
To Next Page