Lelit Grace PL81T - Page 18

Lelit Espresso - English
EN
17
I
Hot water distribution
I.1 Press the hot water switch (5). The pump starts and the water icon appears
on the display (12), accompanied by the indication to rotate the steam/hot wa-
ter knob (11).
I.2 Place a jug under the steam / hot water wand (13) and open the knob (11)
counterclockwise until you reach the desired amount.
I.3 When the desired amount has been reached, close the knob (11) clockwise
and press the hot water switch (5) to stop the function.
Note. e machine is equipped with an electronic control that stops the water
function aer a pre-determined time. To withdraw more water, repeat the “Hot water
distribution” operation.
for experts
Adjusting the LCC settings
The LCC - Lelit Control Center (12) has pre-set default settings. Here you can
learn how to adjust them.
J
Changing the factory settings
J.1 Press the “-” button to enter settings mode, and scroll through the menu.
J.2 Press “+” to change the setting. The setting ashes.
J.3 Change its value and/or state by using the “-” and “+” buttons.
J.4 Three seconds after the last press of a button, LCC stores the data and exits
from settings mode.