Need help?Do you have a question about the Lelit PRO Line MaraX PL62X and is the answer not in the manual?
Identification and description of all key machine components as per the overview.
Configuration of 'Use mode' and 'Temperature mode' pre-set values.
Details on 'Stand by' mode and resin filter installation status.
Lists and describes all accessories included in the equipment box.
Guidance on how to use the original packing for re-use or shipping.
Step-by-step guide for the initial setup, filling, and first use of the coffee machine.
Detailed instructions for installing the water resin filter into the machine.
Instructions on how to prepare espresso and coffee using the machine.
How to use the steam wand and hot water dispenser for beverages.
Explanation of the machine's automatic stand-by mode and how to re-start it.
Methods and recommendations for preventing limestone deposits using the resin filter.
Steps for the daily cleaning of the machine components.
Instructions for performing weekly maintenance and cleaning.
Guidelines for the annual descaling of the hydraulic circuit.
Interpreting pilot lights for machine status, errors, and modes.
General| Boiler Type | Heat Exchange |
|---|---|
| Boiler Material | Stainless Steel |
| Pump Type | Vibratory Pump |
| Water Reservoir Capacity | 2.5 liters |
| Pressure Gauge | Yes |
| PID Temperature Control | Yes |
| Type | Espresso Machine |
| Manufacturer | Lelit |
| Model | PL62X |
| Group Type | E61 |
| Boiler Size | 1.8 liters |
| Pump Pressure | 15 bar |
| Portafilter Size | 58 mm |
| Steam Wand | Yes |
| Hot Water Dispenser | Yes |
| Pre-infusion | Yes |
| Voltage | 220-240 V |
To Next Page
