Need help?Do you have a question about the Lelit PL62X and is the answer not in the manual?
The LELIT PL62X Marax is a high-quality coffee machine designed for espresso and coffee preparation, featuring steam and hot water dispensing capabilities. This user manual provides comprehensive instructions for its operation, maintenance, and troubleshooting, ensuring optimal performance and longevity of the appliance.
The LELIT PL62X Marax is engineered to deliver a superior coffee experience. Its core function is the extraction of espresso and coffee, facilitated by a brewing group and a lever mechanism. The machine is equipped with a manometer that displays both steam and pump pressure during extraction, allowing users to monitor and control the brewing process precisely.
Beyond coffee, the PL62X Marax offers versatile steam and hot water functions. It features a multi-directional, anti-burn steam wand for frothing milk, essential for preparing lattes and cappuccinos. A separate multi-directional, anti-burn hot water wand provides hot water for Americanos, tea, or pre-heating cups. The machine incorporates an Xmode switch, which likely allows users to select different operating modes, such as a dedicated steam mode, to optimize performance for various tasks.
The machine's operation is straightforward, with an ON/OFF main switch and a temperature mode switch, which can be set to "Warm" as a pre-set value. Pilot lights indicate the machine's status, such as "Machine ready," "Heating phase," or "Water tank missing/empty," guiding the user through its various states. The PL62X Marax also includes a stand-by mode, which automatically activates after a period of inactivity to conserve energy.
Operating the LELIT PL62X Marax involves several user-friendly steps. Before first use, the machine requires an initial setup, including filling the water tank and allowing the hydraulic circuit to fill and heat up. The water tank has a capacity of 2.6 liters and is easily accessible.
For coffee preparation, users select the appropriate coffee filter (1-dose or 2-doses), insert it into the filterholder, and fill it with ground coffee. The tamper is used to press the coffee powder firmly. The filterholder is then fixed into the brewing group, ensuring alignment with the padlock symbol. To start coffee extraction, the group lever is lifted completely, and to stop, it is returned to its initial position. The lighted frame of the ON/OFF switch flashes during extraction, indicating the pump's operation.
When using the steam or hot water wands, it is recommended to lift and return the group lever about 30 seconds beforehand to achieve optimal performance. The dispensing knobs for steam and hot water are turned anti-clockwise to start dispensing and clockwise to stop. The rotation of these knobs allows for adjustment of the quantity and intensity of steam or hot water.
The machine's stand-by mode is activated after 30 minutes of inactivity, indicated by a flashing ON/OFF switch frame and off pilot lights. To restart the machine, the group lever must be lifted completely and returned to its initial position, followed by a brief wait until all pilot lights are firmly on. The stand-by function can be disabled for users who prefer continuous operation, with instructions available in the extended guide.
Regular maintenance is crucial for the LELIT PL62X Marax to ensure its longevity and consistent performance. The manual outlines daily, weekly, and annual cleaning procedures.
Daily cleaning involves general cleaning of the stainless steel body with a soft, microfiber cloth and tap water. Group cleaning is performed after each extraction by emptying the coffee filter, washing the filterholder and filter with tap water, and using a brush to remove coffee residues from the group gasket. The steam wand also requires daily cleaning after frothing milk; a soft cloth is used to clean the nozzle, followed by dispensing a small amount of steam to clear any milk residue from the holes.
Weekly cleaning focuses on filters and portafilter cleaning. This involves immersing the filterholder and used filters (excluding the handle) in a jug with hot water and a detergent powder solution for 15 minutes to eliminate coffee oils. Backflushing is another weekly task, where a blind filter and detergent powder are used with the group head lever to clean the brewing group. This procedure involves repeated cycles of lifting the lever for 10 seconds, stopping, and waiting for 10 seconds. The steam wand also undergoes weekly cleaning by immersing it in a solution of cold water and detergent liquid, dispensing steam in cycles, and then rinsing with fresh water.
Annual cleaning is recommended for descaling the hydraulic circuit. This specialized procedure should be performed by a reseller or specialized technician to prevent damage to the internal components and ensure constant performance.
Limescale prevention is addressed through the use of a water softener filter, which has an autonomy of 35 liters. The manual provides instructions for installing the filter and reminds users to replace it every 14 complete fillings of the water tank or after 4 months of use. If the machine remains unused for a month, the filter should also be replaced. The water tank handles include slides to help users track the number of fillings.
The machine's packaging is designed to be reusable, encouraging users to retain it for potential maintenance or repair needs, facilitating safe transport to service centers.
General| Boiler Type | Heat Exchanger |
|---|---|
| Boiler Material | Stainless Steel |
| Water Tank Capacity | 2.5 liters |
| Steam Wand | Yes, multi-directional |
| PID Temperature Control | Yes |
| Pump Pressure | 15 bar |
| Power | 1400 W |
| Pre-infusion | Yes |
| Pump Type | Vibratory |
| Type | Espresso Machine |
| Voltage | 230 V |
To Next Page
