Lelit Grace PL81T - Initial Machine Setup and Water Filling; Starting the Machine for First Use; Water Tank Filling Procedure

VIP Line - Grace - PL81T · Victoria - PL91T
12
05.
Instructions for use
Lelit coffee machines are not automatic. To make a good cup of coffee, you
must know how to use them properly and will need a bit of practice. Follow the
instructions carefully. You can also refer to the Quick start guide where you will
nd illustrated instructions. You’ll soon be making coffee just like in the cafes,
with the ideal smooth, creamy texture you prefer.
to start
Starting the machine
It is important to carefully follow these instructions the rst time the machine is
started, to ensure that it works properly. These instructions are only for the rst
time the machine is used. The instructions given in the subsequent chapters are
for all further use. For subsequent uses do not consider this chapter and follow
the chapter Making an Espresso.
A
Open the packaging
A.1 Open the packaging and place the machine on a at surface.
Be careful. e unit weighs 7.4 kg (PL81T) - 9.2 kg (PL91T).
B
Water lling
B.1 Remove the tank from its seating (1).
B.2 Fill the tank with water at room temperature.
B.3 Replace the tank in its seating.
Caution. e tank is tted with a device that automatically detects the presence
of water. When repositioning the tank, check that the tubes are not bent and that the lter
is fully inserted into the end of one of them. In case of lack of water, the LCC will shows a
warning signal. Follow the instructions in section B to rell the tank.