Contents
1. Model Overview .............................................. 1
2. Your Safety ..................................................... 2
3. Component Overview ................................... 12
4. Putting Into Operation................................... 13
5. Twine wrapping* ........................................... 22
6. Net Wrapping* .............................................. 27
7. Cutting Device* ............................................. 30
8. Field Use .......................................................36
9. Wrapping.......................................................42
10.Overload protection ......................................50
11 "BALERCONTROL"* .....................................53
12. Maintenance / Settings.................................65
13. Technic al Data ..............................................78
The machine number is entered onto the data plate shown
opposite and is located on the right hand side of the baler.
Warranty claims and enquiries cannot be processed without
this number. Please enter this number here below immediately
after delivery:
Ident - Nr.
max. Ges. Gewicht/Gross Weight
max. Achslast/Axle Load
Baujahr/Year of Manufacture
max. Stützlast/Imposed Load
Höchstgeschw./max. Speed
Lely Welger Maschinenfabrik GmbH • Gebrüder - Welger-Str. 3
D - 38304 Wolfenbüttel • Made in Germany
Typ
Ausführung
Read the operating manual and safety instructions before putting the baler into operation. We have
inserted a warning sign in this operating manual at points concerning your safety. Please also pass on all
safety instructions to other users. The warning and instruction plates on the baler provide important
information for safe operation. Paying attention to them is for your own safety!
* Please note that the features marked with a [*] in this operating manual are fitted only to some
models as standard or are only available for particular models as additional features. These
features may also not be supplied to all export countries.
Reproduction prohibited - all rights reserved. Design and construction subject to alterations. The illustrations shown are non-binding for
model, form and equipment. 2000 by Lely Welger Maschinenfabrik GmbH, Wolfenbüttel. Made in Germany.
Manufacturer:
Lely Welger Maschinenfabrik GmbH
Postfach 1965 • 38289 Wolfenbüttel / Germany
Telephone: +49 (5331) 404-0 • Fax: +49 (5331) 404-312 • e-mail: servex.lely-welger@t-online.de
To Next Page
Loading...
Need help?
General
