WELGER RP 202 • RP 220 • RP 302 • RP 320 3
2.2. Fire prevention
• Crop materials are very combustible.
• Always keep the baler free of crop remnants and oil
contamination.
• Should overheating of the baler components occur,
determine the cause and resolve accordingly.
• Always keep the electrical circuits of the tractor and baler, as
well as the tractor’s exhaust system in perfect working order.
• The supplied cabling may not be used for purposes other
than for factory installed or approved electrical equipment.
Overloading the electrical cables leads to excessive heating.
• Smoking is forbidden in the vicinity of the baler.
• Always keep a suitable fire extinguisher within easy reach.
2.3. Tailgate safeguard
If maintenance or installation/assembly work is performed
with the tailgate open, it is essential to secure the tailgate to
prevent it from falling.
Use the cut-off valve on the right side of the baler for this
purpose. The shut-off valve may only be actuated from the right
side of the machine.
Return the valve to its original position after completing
maintenance and installation/assembly work (fig. 2).
0388.37.00.00
fig. 1
fig. 2
0387-35
fig. 3
To Next Page
Loading...
Need help?
General
