Need help?Do you have a question about the LELY ASTRONAUT A4 and is the answer not in the manual?
General| Category | Robotics |
|---|---|
| Type | Milking Robot |
| Model | ASTRONAUT A4 |
| Manufacturer | LELY |
| Cleaning System | Automatic cleaning system |
| Power Requirements | 400V, 50Hz |
| Software | LELY T4C (Time for Cows) |
| Communication | Ethernet |
| User Interface | Touchscreen display |
| Dimensions | Varies depending on configuration, but typically around 3.5m x 2m x 2.5m (L x W x H) |
Provides comprehensive safety guidelines for operating, maintaining, and working near the machine.
Explains the meaning and usage of various signal words and hazard symbols within the manual.
Details the location and explanation of all safety decals affixed to the machine components.
Describes the function, location, and reset procedure for the machine's emergency stop buttons.
Details the chemical products used for cleaning and disinfection, including composition and safety data.
Outlines the requirements for the water supply system, covering building specifications and quality parameters.
Provides an overview of the milking robot's components and systems, including cleaning and feed units.
Guides the user through the process of starting and executing various cleaning cycles for the robot.
Details the procedures for taking the robot unit out of operation and putting it back into active service.
Presents a schedule of recommended preventive maintenance tasks and their frequencies for the robot.
Instructions on how to move the robot arm to specific service positions or back to the home position.
Procedures for removing and installing various covers and doors on the robot unit for access.
Detailed steps for carrying out specific maintenance tasks like feed unit calibration and sensor checks.
Provides examples and dimensions for installing the gate guard set for cow safety.
Information on the correct and environmentally responsible disposal of the product and its components.
To Next Page
