EasyManua.ls Logo

LELY ASTRONAUT A4 - Water Supply

LELY ASTRONAUT A4
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.1004.8641.0 B
Specifications 2-5
Udder care must be colored.
The optical- and conductivity characteristic of the udder care must be stable.
The safety data sheets of the Lely products are available at https://www.lely.com/techdocs/consumables/.
2.2 Water Supply
2.2.1 Building Specifications
Tap connection(s): ¾ outside thread.
The central unit must be supplied with cold water.
Option: the central unit can be supplied with cold and hot water.
The hot water supply is used to fill the boiler to save energy and heating time.
A KIWA approved backflow preventer (type B/A) or equivalent, with a KIWA approved filter and two
KIWA approved shutoff valves, must be installed in the water supply. The B/A backflow preventer
should be installed in the same room as the central unit (Two central units in two separate rooms =
two B/A backflow preventers). The hot water supply requires its own backflow preventer. When a
separate water source is used to supply the central unit with water, a backflow preventer is not
required.
The B/A backflow preventer is supplied with the robots.
in n o vato rs in agriculture

Table of Contents

Other manuals for LELY ASTRONAUT A4