E-15
- Pivot points A (fig. 17) of the swivel wheels of the Classic model
to be greased every 40 working hours.
- Pivot points B of the tandem wheel assemblies of the Master
model to be greased every 40 working hours.
- Pivot points C of the rotors on the frames to be greased every 40
working hours.
- Pivot points D of the protection brackets on the frame support to
be greased every 40 working hours.
- Pivot points E of the frames on the trailer to be greased every 40
working hours.
- Splines F of the height adjustment system (spindle) to be greased
every 40 working hours.
Draw bar eye model:
- Pivot point A (fig. 18) for forward inclining to be greased every
40 working hours.
- Parking jack pivot point B to be greased every 40 working hours.
Portal headstock model:
- Headstock pivot point C to be greased every 40 working hours.
Steering axle model:
- Pivot points D of steering mechanism to be greased every 40
working hours.
- Pivot points E of headstock and steering trestle to be greased
every 40 hours.
- Grease or lubricate all remaining pivot points every 40 working
hours.
17
C,4x F,2x E,4x
D,2x
A,4x F,1x B,4x
40h
18
40h
A,1x
B,1x
D,1x
C,1x
D,8x
To Next Page