LEM RD204 - Technical Specifications Summary; Input Channel and EQ Specifications; Master, Output, and Effect Specifications; General Mixer Dimensions and Weight

14
rd204 & rd204fx
SECTION LEVELS AND DATA CONNECTORS
sensitivity from 0 to -60dB
impedance 1.5kOhms
sensitivity from +15 to -45dB
impedance 10kOhms
input 0dB
output 0dB
LOW CUT
HIGH
MID
LOW
sensitivity -10 / +4 dB
impedance 10kOhms
HIGH
HI-MID
LO-MID
LOW
+4dB Balanced XLR-M
0dB Unbalanced JACK
input 0dB
output 0dB
MONO output
output level 0dB Unbalanced JACK
C. ROOM output
output level 0dB Unbalanced JACK
GROUP outputs
output level 0dB Unbalanced JACK
AUX sends
output level 0dB Unbalanced JACK
input 0dB
output 0dB
minimum impedance 200 Ohms
output level 2x193mW
Bands
Gain
Type of effect
PRESETS
Controls
Maximum Levels
MIC IN
TAPE IN
other inputs
MAIN MIX outputs
other outputs
Crosstalk
FADER
PAN
HUM & Noise
THD + Noise
Weight
kg
Dimensions
mm (WxHxD)
> 82dB @ 1kHz
> 82dB @ 1kHz
+22dB
+22dB
+22dB
+28dB
+22dB
9
580x410x95
-93dB
<0,005% @ +4dB, 1kHz
HALL, ROOM, VOCAL and PLATE reverbs
MONO e STEREO DELAY
CHORUS, FLANGER e VIBRATO
REV + DELAY, REV +CHORUS, REV +FLANGER, REV + VIBRATO
256 (16 PRESETS x 16 VARIATIONS)
RD204 • TECHNICAL SPECIFICATIONS
Stereo JACK
Balanced JACK
MAIN MIX output
Stereo JACK
Main MIX insert
STEREO INPUT CHANNEL
75Hz @ 18dB/oct.
±15dB @ 12kHz, SHELVING
Insert
MONO INPUT CHANNEL
±15dB from 100Hz to 8kHz
±15dB @ 80Hz, SHELVING
Stereo JACK
Balanced XLR-F
MIC input
EQ
LINE input
Balanced JACK
GENERAL SPECIFICATIONS
GRAPHIC EQ
+/- 15dB
LINE input
MASTER SECTION
EQ
±15dB @ 12kHz, SHELVING
±15dB @ 500Hz, PEAKING
±15dB @ 80Hz, SHELVING
±15dB @ 8kHz, PEAKING
output level
16-position PRESET BANK selector
16-position VARIATIONS selector
CLIP LED
MUTE button with LED
HEADPHONES
output
2-TRACK
RCA
INTERNAL EFFECT (DFX)
9