— 4 —
POWER SUPPLY
1. Using Battery: open the battery compartment door at the bottom,
correctly install 6(1.5V “C” Size) batteries according to the direction
shown in the battery room, then cover the cell door.
2. AC Power: plug one end of the AC power cord into the AC power
jack of this product, and plug the other end into the 120V household
power outlet.
NOTE:This product can only use the AC power supply voltage
indicated on the manual or the casing.
NOTE:
1. When unplugging the AC power cord, hold the plug by hand instead
of pulling the power cord.
2.Never touch the AC power plug when your hands are wet,otherwise it
may cause electric shock.
3. The power cord should be fixed to avoid twisting or trampling.
4. Do not use power sockets with too thin and extended wires.If the
Outlet is overloaded, it will cause fire or electric shock.
5. If the product is not used for a long time, Please unplug the AC power
plug from the socket and take out the dry battery to prevent the battery
from leaking and damaging the parts.
To Next Page
Loading...
