Repeat the playlist
Press the REPEAT button (4) once to repeat the current track.
Press the REPEAT button (4) twice to repeat the playlist.
Cancel the playlist
Press the STOP button (8) twice to cancel the playlist.
Playing an USB device
Connect a USB device to the USB socket (15).
1. Slide the FUNCTION switch (16) into CD/USB (AUX IN) position.
The unit will now start reading the USB device. This may take some time.
After the reading is complete the unit will start to play automatically.
2. Slide the FUNCTION switch (16) into OFF position to turn off the unit.
Notes:
When a disc is being played and a USB device is connected the unit will
automatically switch to play content from the USB device.
When a USB device is being played and a CD is inserted, the unit will
automatically switch to play the CD.
When both a USB device and a CD are inserted and you turn on the unit, the
unit will start playing content from the USB device.
When an AUX cable is connected, the unit will switch to AUX mode.
Play / pause playback
During playback press the play / pause button (9) to pause the playback.
In pause mode press the play / pause button to resume the playback.
In stop mode press the play / pause button to start the playback.
Stop playback
During playback press the stop button (8) to stop the playback.
Go to the next track
Press the next button (2) to skip to the next track.
Note: If you have reached the last track of the root directory or in the current
folder and there are multiple folders in the root directory the unit will automatically
skip to the next folder (USB playback).
Fast forward through the currently playing track
Press and hold the next button (2) to fast forward through the currently playing
track.
To Next Page
Loading...
