LENCO SCD-38USB - Page 4

POWER SUPPLY
USING HOUSE CURRENT
Beforeuse,checkthattheratedvoltageofyourunitmatches
yourlocalvoltage.
Note:Plugisusedasthedisconnectdevice.
The disconnect device shall remain readily operable.
USING BATTERIES
Disconnect the AC power cord
from the AC inlet of the unit.
Battery power is cut
automatically by the cord
while it is connected.
Insert six UM-2
(sizeC)batteries.
battery door
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
To AC socket
To AC outlet
AUX IN
FUNCTION
AUX. IN
AUX. IN
An external (auxiliary) audio source (i.e., personal CD player
orMP3player)canbeconnectedtothisunitandheardthrough
the speakers.
1) PlugoneendofcableintotheAUXINsocketontheunit.
2) PlugtheotherendofthecableintotheHeadphoneor
Line Out socket of the external source.
3) Set function switch on the unit to AUX IN.
ContinuetooperateCDorMP3playerasusual.Selectionswillbeheardthroughtheunit'sspeakers.
(Plugotherendintoexternal
source such as an MP3 player.)
ADJUSTING THE SOUND
TO ADJUST THE VOLUME
VOLUME
MAX. MIN.
LISTENING TO THE RADIO
1 . Set to FM
2 . Tune in to a station.
TUNING
GB 2
Unit will be automatically off after 15 mins without further operation.
Afterautooff,slidetheFUNCTIONselectortoOFFpositionandthenslidetoAUXINpositionforlistening.
FUNCTION
FM
3 . Adjust the sound.
VOLUME
MAX. MIN.