LENCO SCD-420RD - Compact Disc (CD) Playback; Basic CD Playback and Controls; Track Navigation

6. Press the PLAY/PAUSE button.
Track number "01" & the symbol " " will be
shown during normal compact disc playback.
GB 3
COMPACT DISC PLAYBACK
2 . Set to CD
4. Insert a disc with the label side facing up.
5 . Close the disc holder.
The disc will rotate and
the total tracks of the disc
will show on the display.
FUNCTION
CD
LCD display
1 . Turn on the unit by
pressing the
STANDBY button.
STANDBY
LCD display
TO INTERRUPT PLAYBACK
Press the Play/Pause button and the symbol " " will
be ashed. Press the button again to resume playback.
TO STOP PLAYBACK
Press the STOP button and the display
shows the total tracks of the disc.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the skip buttons according to the desired skip direction.
• Play/back resumes from the selected track.
• When the button is pressed once during play, the previous track starts again.
• When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the or button pressed during playback,
and release the button as soon as you recognise the
desired passage. Then normal CD playback will resume from this point.
LCD display
PLAY/PAUSE
FOR BETTER RECEPTION
FM
AFTER LISTENING
Turn o󰀨 the unit by pressing the STANDBY button.
3 . Open the disc holder by pushing the CD door
open area.
Unit will be automatically o󰀨 at about 30mins without further operation (in stop mode / CD door open).