LENCO SPB-260 - Specifications; Technical Details; Disclaimer and Guarantee; Product Updates and Warranty

16
Specifications
Model
SPB-260BK
Inputs
BT/AUX1/AUX2/OPT/COAX/USB
Drivers
0.75"*2 + 5"*2
Audio Output Power
60W*2=120W R.M.S.
Frequency Response
55Hz-20KHz
Signal-to-Noise Ratio
≥72dB
Power consumption
120W (max)
Power lnput
AC 110V-240V 50Hz/60Hz
Bluetooth Operating Range
Version: 4.2
Range: up to 10m
Dimensions
(W162*H272*D240)*2 mm
Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from the
description made in this manual.
Guarantee
Lenco offers service and warranty in accordance to European law, which
means that in case of repairs (both during and after the warranty period) you
should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco
directly.
Important note: If this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all
warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from the
description made in this manual.