Page 34 - IOM / ROOF-TOP FLEXY™ Series
Variable or setpoint value
Digital Values
1 <--> ON 0 <--> OFF
Temperatures
Temperatures are displayed in °C, to an accuracy of 0.1 °C
<--> -21.6 °C <--> + 105.8 °C
Pressures
Pressure is given in bars, to an accuracy of 0.1 bar.
<--> 18.3 bars
Other analog values
Valeurs displayed Values non
displayed
Specific Displays
Software Version
When the unit is powered up, the software version number is displayed.
<--> version 1.0 (for example)
Display Test
The display can only be tested for correct operation when the unit is powered up and by pressing on the 3 keys
"A", "M" and "-" simultaneously. If the display is working correctly, the following will be displayed:
All digits are properly displayed.
Communication Error
If there is no communication between the KP02 display unit and the CPU card, the following message is displayed:
<--> "Communication problem"
USING THE KP02 MAINTENANCE CONTROL DISPLAUSING THE KP02 MAINTENANCE CONTROL DISPLA
USING THE KP02 MAINTENANCE CONTROL DISPLAUSING THE KP02 MAINTENANCE CONTROL DISPLA
USING THE KP02 MAINTENANCE CONTROL DISPLA
YY
YY
Y
To Next Page
Loading...
Need help?
General
