Lennox G61MPV?36B?045 - Page 51

Page 51
TABLE 25
G61MPV−60C−110 and G61MPV−60C−111 BLOWER MOTOR PERFORMANCE (LESS FILTER)
0.0" to 0.8" w.g. (0 through 200 Pa) External Static Pressure Range
Factory Settings: Heating Speed − 2; Cooling Speed − 4; Speed Adjust − NORM.
Return Air Options: Single side return air with optional RAB return base. −
20 x 25 x 1 in. (508 x 635 x 25 mm) cleanable air filter in order to maintain proper air velocity across the filter.
ADJUST"
Switch
Positions
Speed Switch Positions
Second Stage HEAT" Speed Second Stage COOL" Speed
1 2 3 4 1 2 3 4
cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s
+
1475 695 1670 790 1865 880 2070 980 1555 735 1685 795 1895 895 2130 1005
NORM 1345 635 1500 710 1695 800 1865 880 1415 670 1540 725 1735 820 1930 910
 1180
555 1345 635 1510 710 1685 795 1245 590 1350 635 1545 730 1725 815
ADJUST"
Switch
Positions
First Stage HEAT" Speed First Stage COOL" Speed
1 2 3 4 1 2 3 4
cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s
+
1330 625 1510 715 1695 800 1875 885 1085 510 1155 545 1310 620 1475 695
NORM 1195 565 1375 650 1550 730 1725 815 955 450 1050 495 1185 560 1335 630

1080 510 1210 570 1370 645 1520 715 850 400 920 435 1070 505 1195 565
NOTES − The effect of static pressure is included in air volumes shown.
First stage HEAT is approximately 91% of the same second stage
HEAT speed position.
First stage COOL (two−stage air conditioning units only) is approximately 70% of the same second stage COOL speed position.
Continuous Fan Only speed is approximately 38% of the same second stage COOL speed position − minimum 500 cfm (235 L/s).
Lennox Harmony IIIt Zone Control Applications − Minimum blower speed is 463 cfm (220 L/s).
TABLE 26
G61MPV−60D−135 BLOWER MOTOR PERFORMANCE (LESS FILTER)
0.0" to 0.8" w.g. (0 through 200 Pa) External Static Pressure Range
Factory Settings: Heating Speed − 2; Cooling Speed − 4; Speed Adjust − NORM.
Return Air Options: Bottom; both sides; or bottom and one side.
ADJUST"
Switch
Positions
Speed Switch Positions
Second Stage HEAT" Speed Second Stage COOL" Speed
1 2 3 4 1 2 3 4
cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s
+
1505 710 1705 805 1900 900 2110 995 1615 760 1730 815 1945 920 2190 1035
NORM 1365 645 1550 730 1740 820 1920 905 1455 685 1580 745 1780 840 1985 935
 1225
580 1380 650 1545 730 1720 810 1305 615 1400 660 1600 755 1780 840
ADJUST"
Switch
Positions
First Stage HEAT" Speed First Stage COOL" Speed
1 2 3 4 1 2 3 4
cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s cfm L/s
+
1385 655 1570 740 1760 830 1930 910 1135 535 1205 570 1365 645 1540 725
NORM 1250 590 1425 670 1595 755 1775 835 1025 485 1105 520 1235 580 1390 655

1135 535 1265 595 1430 675 1585 750 915 430 985 465 1115 525 1235 585
NOTES − The effect of static pressure is included in air volumes shown.
First stage HEAT is approximately 91% of the same second stage
HEAT speed position.
First stage COOL (two−stage air conditioning units only) is approximately 70% of the same second stage COOL speed position.
Continuous Fan Only speed is approximately 38% of the same second stage COOL speed position − minimum 500 cfm (235 L/s).
Lennox Harmony IIIt Zone Control Applications − Minimum blower speed is 470 cfm (210 L/s).