G61MPV / Page 26
BLOWER DATA
G61MPV−60C−110 BLOWER PERFORMANCE (less filter)
Bottom Return Air, Return Air from Both Sides or Return Air from Bottom and One Side.
0 through 0.80 in. w.g. External Static Pressure Range
"
Speed Switch Positions
Switch
Second Stage HEAT" Speed − cfm Second Stage COOL" Speed − cfm
Positions
1
1
2 3 4 1 2 3
1
4
+ 1505 1710 1915 2130 1625 1745 1990 2210
1
NORM 1370 1565 1765 1945 1465 1580 1790 1995
1205 1380 1565 1740 1290 1405 1605 1790
ADJUST"
First Stage HEAT" Speed − cfm First Stage COOL" Speed − cfm
Switch
Positions
1
1
2 3 4 1 2 3
1
4
+ 1370 1570 1760 1945 945 1020 1160 1300
1
NORM 1235 1420 1600 1780 840 910 1055 1180
1105 1250 1420 1580 740 800 920 1045
1
Factory default jumper setting.
NOTES − The effect of static pressure is included in air volumes shown.
First stage HEAT is approximately 91% of the same second stage
HEAT speed position.
First stage COOL (two−stage air conditioning units only) is approximately 70% of the same second stage COOL speed position.
Continuous Fan Only speed is approximately 38% of the same second stage COOL speed position − minimum 500 cfm.
Lennox Harmony III Zone Control Applications − Minimum blower speed is 463 cfm.
G61MPV−60C−110 BLOWER MOTOR WATTS
Motor Watts @ Various External Static Pressures − in. wg.
Jumper Speed
First Stage Second Stage
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
+" (Plus) SETTING (Adjust" Jumper at +" Setting)
HEAT"
Tap 1
165 195 230 265 300 336 370 400 430 210 245 290 330 365 395 435 470 510
Speed
Tap 2
245
285 325 370 400 435 470 505 540 330 365 405 445 480 520 560 600 640
Tap 3
365
395 430 465 510 550 590 630 670 450 490 535 580 625 665 700 735 770
Tap 4
480
520 565 610 645 685 725 770 810 625 670 715 760 805 850 890 930 970
COOL"
Tap 1
75 90 115 135 160 180 200 220 240 280 315 350 390 430 475 510 550 585
Speed
Tap 2
90
105 130 150 175 200 220 245 270 340 380 425 465 505 545 575 610 645
Tap 3
120
140 170 195 225 250 275 300 330 510 545 585 620 675 735 770 805 840
Tap 4
160
185 210 235 265 290 325 360 395 710 755 805 855 905 950 980 1010 1035
NORM" (Normal) SETTING (Adjust" Jumper at NORM" Setting)
HEAT"
Tap 1
150 170 190 205 245 280 305 335 365 170 200 235 270 300 330 365 400 430
Speed
Tap 2
195
220 255 285 320 360 390 420 445 240 275 320 365 400 430 465 500 530
Tap 3
265
300 335 370 410 445 480 520 555 360 395 435 475 510 550 585 620 650
Tap 4
370
410 455 495 525 550 590 630 670 460 500 545 590 635 675 720 760 805
COOL"
Tap 1
55 70 90 110 135 155 175 195 215 205 235 275 310 345 380 415 450 485
Speed
Tap 2
75
90 105 125 150 170 190 215 235 250 285 325 360 400 440 470 505 540
Tap 3
95
115 135 160 190 220 240 265 285 375 410 445 485 530 575 605 635 670
Tap 4
125
150 175 200 225 255 280 305 335 510 550 595 640 685 725 770 815 860
−" (Minus) SETTING (Adjust" Jumper at −" Setting)
HEAT"
Tap 1
105 130 155 180 210 235 260 285 305 140 160 180 200 235 265 295 320 350
Speed
Tap 2
140
165 195 225 250 280 310 345 375 165 195 230 265 300 335 370 405 440
Tap 3
185
220 255 290 325 355 390 420 450 250 285 325 360 395 430 465 500 530
Tap 4
250
290 335 375 410 445 480 520 560 340 375 420 460 495 530 565 605 645
COOL"
Tap 1
45 60 80 100 115 125 145 160 180 155 180 210 240 270 295 325 355 385
Speed
Tap 2
55
70 85 105 125 150 165 185 200 185 215 245 280 315 345 380 415 450
Tap 3
70
85 105 125 150 170 195 215 235 265 300 345 385 425 465 500 535 570
Tap 4
95 110 135 160 190 220 240 260 280 375 415 455 495 535 575 615 650 690