10. OPERATION
Lift panel function (only for some cassette specific panel)
2. Press the button + and - to control the lift and drop of the panel.
Pressing the + button can stop the panel,while it is dropping.
Pressing the - button can stop the panel,while it is lifting.
The F2 mark appears when
the panel is adjusted.
1.When the unit is o, Press the Mode button long to
activate the lift panel function.The mark will ash.
26
Mode
Turbo/Auxiliary Heat function (on some models)
Press TURBO to activate/deactivate the Turbo/Auxiliary
Heat function. The turbo function sets the unit to reach
the user’s present temperature in the shortest amount of
time possible.
When the user presses TURBO in the COOL mode, the
unit sets to the highest fan speed setting to jump−start
the cooling process.
When the user presses TURBO in the HEAT mode, for
units with AUX. HEAT, the AUX. HEAT activates and
jump−starts the heating process.
Back/Turbo
•
•
•
To Next Page
Loading...
