Page 42
ACCESSORY
PANEL MULLION
DIVIDER PANEL
BOTTOM OF
COMPRESSOR
SECTION
FLANGED
RETURN AIR
OPENING
ECONOMIZER
FIGURE 33
TABLE 13
ECONOMIZER MODES AND SETPOINT
Mode
Set Point
Sensors
air (RT6) when outdoor air is suitable:
Input Ranges
TEMP None Needed
161).
TEMP OAT STPT None Needed
Remote Remote
Energy Management
System**
Either of the TEMP modes can be used when a network OAS
signal is provided by an energy management or building control
NA
ODE STPT
12-19mA
GLOBAL GLOBAL 24VAC Input Signal
outdoor air damper applications. Global input also brings on the
blower. (This mode is NOT used when OAS signal is provided via
network connection. GLO is only used when a 24VAC signal is
NA
To Next Page
Loading...
Need help?
General
