Service Manual
Installation and Maintenance
41
11.Removal Procedure
Caution: pull out the power,discharge the
refrigerant completely before removal.
Steps
Procedure
Loosen the clasp fixing chassis;
remove the screws fixing the rear part
of cabinet and then pull out the unit.
Open t he air-inlet panel; remove the
filter; remove the screws in the middle,
at the left side and right side of the
panel; beat the clasp of cabinet slightly
and then remove the panel.
air-inlet panel
filter
screw
clasp fixing chassis
1.Remove panel assy
2.Remove cabinet
To Next Page
Loading...
Need help?
General
