6
• Operation mode. These icons
show the current mode of operation.
Press the mode button to scroll
through the operation modes:
Auto → Cool → Dry → Heat → Fan.
• Setpoint or Room Temperature.
Displays the setpoint temperature
during normal operation. Displays the
room temperature when in Follow me
mode. Adjust the setpoint with up &
down arrow buttons. No display when
unit is in Fan mode.
• Timer ON/OFF. These icons light up
to indicate that the indoor unit has a
timed auto-start or auto-stop set up.
Battery charge status. Icon displays
charge status of wireless remote
controller batteries.
• Night mode. Icon displays to indicate
that night mode operation is on.
• Follow me. This icon displays when
the air temperature sensor in the
wireless remote controller is the
sensor being used by the indoor unit.
When this function is off, the indoor
unit uses a built-in sensor.
• Fan speed. Displays the current fan
speed.
Operation Instructions
Batteries
1. Remove battery cover from back of
remote.
2. Insert batteries into battery
compartment.
3. Replace cover on controller.
NOTE: ON/OFF Timer, setpoint, fan
speed and all other functions
will have to be reset whenever
the batteries are completely
discharged or are replaced.
To Next Page
Loading...
Need help?
General
