Replacing the Motor Module
1 -
2 -
3 - two
TWO HARNESS
CONNECTIONS
MOTOR CONTROL MODULE
MOTOR
Unplug the Two Harness Connection
FIGURE 17
REMOVE BOTH HEX
HEAD BOLTS
Remove the Hex Head Bolts
FIGURE 18
Testing the Motor (FIGURE 19)
1 -
2 -
3 -
FIGURE 19
TABLE 9
Measurement range in
2 M
-
Motor Module Installation
-
USE OF THE
WRONG MOTOR CONTROL MODULE MAY RESULT IN
UNEXPECTED UNIT OPERATION.
1 -
2 -
3 -
CONNECTOR
ORIENTATION
BETWEEN 4 AND 8
O'CLOCK
BACK OF CONTROL
MODULE
FIGURE 20
To Next Page
Loading...
Need help?
General