10
Description: Indoor unit cannot communicate with the outdoor unit.
• Use a multimeter to test the
resistance of the reactor which
does not connect with the
capacitor.
• The normal value should be
zero ohm. Any other reading
typically indicates the reactor
has malfunction.
4.4. TS04-S-IDU
Description: When the indoor fan speed is to low or to high undeterminate amount of time, the LED displays the failure
code and the system turns off.
Possible Affected Components: Indoor main PCB, fan motor, fan assembly or connection wires.
Troubleshooting and Repair:
To Next Page
Loading...
