Lennox Prodigy Installation & Setup Guide

Page 16
SETTINGS Menu Interface SETTINGS (Continued)
SETTINGS > CONTROL > BACNET
Select SETTINGS > CONTROL > BACNET as shown in the following diagram; default settings will be used. You may adjust
those settings to suit the building’s requirements. The following diagram shows the BACNET menu’s structure and how to
make changes.
BACNET
MAC
AD-
DRESS
AD:XXX BAUD
RATE
XX.XK
CONTROL
MODE
BACKUP
MODE
OCP
HEAT
BU
STPT
UNOCP
HEAT
BU STPT
OCP
COOL
BU STPT
UNOCP
COOL
BU STPT
START UP
DELAY
OVERRIDE
TIMER
BLOWER
ON
OCP
ALWAYS ON
CYCLES
NET-
WORK
SENSOR
TSTAT
RAT
NONE
TEMP
NO
YES
MONITOR ONLY
REMOTE
ZONE
ZONE
XX.XºF XX.XºF XX.XºF
XX
X
CONTROL
XX.XºF
SETTINGS > CONTROL > LONTALK
Select SETTINGS > CONTROL > LONTALK as shown in the following diagram; default settings will be used. You may
adjust those settings to suit the building’s requirements. The following diagram shows the LONTALK menu’s structure and
how to make changes.
CONTROL
MODE
BACKUP
MODE
OCP
HEAT
BU
STPT
UNOCP
HEAT
BU STPT
OCP
COOL
BU STPT
UNOCP
COOL
BU STPT
START UP
DELAY
OVERRIDE
TIMER
BLOWER
ON
OCP
ALWAYS ON
CYCLES
NET-
WORK
SENSOR
TSTAT
RAT
NONE
LONTALK
CO2
NO
YES
RH TEMP
NO
YES
NO
YES
ZONE
CONTROL
MONITOR
ONLY
XX.XºF XX.XºF XX.XºF XX.XºF
XX X
SETTINGS > CONTROL > MSAV
(Multi-stage air volume)
Select SETTINGS > CONTROL > MSAV as shown in the
following diagram; default settings will be in place. You
may adjust those settings to suit the building’s require-
ments. The following diagram shows the MSAV menu’s
structure and illustrates how to use the controls to make
changes.
MSAV MSAV HIGH SPEED XX% [20 TO 100%] ! SET !
MSAV LOW SPEED XX% [20 TO 100%] ! SET 1
CONTROL
SETTINGS > CONTROL > REHEAT
When you select REHEAT, default settings will be in place.
You may adjust those settings to suit the building’s require-
ments. The following diagram shows the REHEAT menu’s
structure and illustrates how to use the controls to make
changes.
CONTROL
REHEAT
DEADBAND
NETWORK
SENSOR
XX% [0 − 99%OR
DEHUMIDISTAT]
REHEAT SENSOR TYPE NONE
DEHUMIDISTAT
LOCAL SENSOR
REHEAT STPT ! SET !
XX% [1 − 10%] ! SET !
! SET !
Use arrows to move

Lennox Prodigy Specifications

General

User Interface	Touchscreen
Connectivity	Wi-Fi
Programming	7-day programmable
Warranty	5-Year Limited Warranty
Compatibility	Lennox HVAC systems
Remote Access	Yes, via mobile app
Display	Color
Fan Control	Yes
Power Source	24V
Temperature Range	40°F to 90°F, Cooling: 50°F to 99°F