Page 21
TABLE 5 Continued
-
-
DIP Switch Settings
Note: All communicating settings are set at the communi-
cating thermostat. See thermostat installation instruction.
In a communication system all DIP switch and clippable
link settings are ignored. For conventional thermostats
proceed with DIP switch and clippable link settings as out-
lined in the following.
Heating Operation DIP Switch Settings
-
Switch 2 -- Second Stage Delay (Used with Single-
Stage Thermostat Only) -- -
-
Switches 3 and 4 -- Blower-O Delay
-
-
-
TABLE 6
Blower O Delay Switch Settings
Blower O Delay
Seconds
Switch 3 Switch 4
120
Indoor Blower Operation DIP Switch Settings
Switches 5 and 6 -- Cooling Mode Blower Speed -
-
-
TABLE 7
Cooling Mode Blower Speeds
Speed Switch 5 Switch 6
Switches 7 and 8 -- Cooling Blower Speed Adjustment
-
To Next Page
Loading...
