Page 22
TABLE 8
Cooling Blower Speed Adjustment
Adjustment Switch 7 Switch 8
Switches 9 and 10 -- Cooling Mode Blower Speed
Ramping -- -
-
NOTE - The o portion of the selected ramp prole also
applies during heat pump operation in dual fuel applica-
tions.
TABLE 9
Cooling Mode Blower Speed Ramping
Ramping Switch 9 Switch 10
Ramping Option A (Factory Selection)
•
•
• -
•
OFF
1/2 MIN
50% CFM
COMPRESSOR DEMAND
7 1/2 MIN
82% CFM
100%
CFM
1/2 MIN
50% CFM
Ramping Option B
•
-
•
OFF
OFF
82%CFM
100% CFM
COMPRESSOR DEMAND
7 1/2 MIN
Ramping Option C
•
•
OFF
100% CFM
100% CFM
45 SEC.
COMPRESSOR
DEMAND
Ramping Option D
•
•
OFFOFF
100% CFM
COMPRESSOR
DEMAND
Switches 11, 12 and 13 -- Heating Mode Blower Speed
--
TABLE 10
Heating Mode Blower Speeds
Heat Speed Switch 11 Switch 12 Switch 13
12%
Switches 14 and 15 -- Continuous Blower Speed -
TABLE 11
Continuous Blower Speed
To Next Page
Loading...
