Lennox SLP98UHV SERIES - Icomfort Toucht Thermostat

Page 37
II−icomfort Touch thermostat (if applicable)
In communicating applications the Lennox icomfort
Touch thermostat must be used. In these applications the
icomfort Touch thermostat overrides the DIP switch set-
tings on the integrated control. Refer to the illustrations pro-
vided with the thermostat for installation, set−up and opera-
tion.
See figures 16 and 17 for icomfort Touch thermostat wir-
ing in communicating applications.
FIGURE 16
icomfort Touch Thermostat with SLP98UHV
and Non−Communicating Outdoor Unit
icomfort−
ENABLED
SLP98UHV
FURNACE
icomfort Touch
THERMOSTAT
NON−COMMUNICATING
OUTDOOR AIR
CONDITIONING UNIT −
1 OR 2 STAGE
icomfort Touch Thermostat
icomfort−Enabled SLP98UHV Indoor Furnace
Non−Communicating Outdoor Air Conditioner
OPTIONAL
OUTDOOR
AIR SENSOR
OPTIONAL
DISCHARGE
AIR SENSOR
icomfort Touch Thermostat with SLP98UHV
and icomfort−ENABLED Outdoor Unit
icomfort Touch Thermostat
icomfort−Enabled SLP98UHV Indoor Furnace
icomfort−Enabled Outdoor Air Conditioner or Heat Pump
icomfort−
ENABLED
SLP98UHV
FURNACE
icomfort TOUCH
THERMOSTAT
icomfort− ENABLED
OUTDOOR AIR CONDITIONING
OR HEAT PUMP UNIT
OPTIONAL
OUTDOOR
AIR SENSOR
OPTIONAL
DISCHARGE
AIR SENSOR
CLIP Y1 TO Y2 FOR
TWO−STAGE OPERATION