1 About these instructions Lenord + BauerTarget group
28 GEL 2432 / 244x
English
1.4 Target group
These mounting instructions are aimed at electricians and fitters who are authorised in
accordance with safety standards to install, electrically connect, place in operation and
to mark equipment and systems; they are also aimed at the operating company and
the manufacturer of the plant.
1.5 Abbreviations and glossary
DC Direct Current
ESD Electro-Static Discharge ....
EMC ElectroMagnetic Compatibility
Measuring
scale
General term for target wheel, toothed rack or slotted disc
These instructions primarily cover target wheel applications. Similar in-
formation then applies to other measuring scales.
1.6 Symbols, marks, notes
The following symbols, marks and notes are used in these mounting instructions so that
you can recognise specific information more quickly:
Instructions on preventing damage
Important information for understanding or optimising work processes
► Work step to be undertaken
→ page 28 Page reference to a different part of these mounting instructions
To Next Page
Loading...