Appendix A. CRU instructions
35
Lenovo G50-30/G50-45/G50-70/G50-70m/Z50-70
8
Remove the screws and detach the metal frame from the hard disk drive.
9
Attach the metal frame to a new hard disk drive and tighten the screws.
0
Put the hard disk drive gently into the hard disk drive bay with the tab
facing upwards and the connectors facing each other; then push it firmly
into space.
A
Reinstall the frame fixing screws.
B
After aligning the attachment clips with their matching gaps, reinstall the
compartment cover.
C
Reinstall and tighten the screws.
D
Reinstall the battery pack.
E
Turn the computer over again.
F
Connect the AC power adapter and the cables to the computer.
5
To Next Page
Loading...
Need help?
General