About the px2-300d Network Storage Components
This topic describes the front and rear panel components of the px2-300d.
Front Panel
Status Indicators, Buttons and Ports
1. LCD display — Scroll through the display screen to view the device name, free disk space, IP address,
and date and time. You can initiate a QuikTransfer Copy Job from the LCD and view or dismiss any errors
or warnings on the px2-300d without having to turn on your computer.
2. Display control buttons — Press to scroll the display screen; select options and functions shown on
the display.
3. Power button — Press and release to power the px2-300d on or off. CAUTION! Holding the power
button for 4 seconds will result in a forced shutdown and could cause data loss if data transfers are in
process.
Holding the power button for 4 seconds will result in a forced shutdown and could cause data loss
if data transfers are in process.
4. Status indicators — Displays the current operational status of the px2-300d.
● System Status: Off when the system is functioning normally. Flashes blue during RAID
rebuild. Flashes red if there is a system or drive error. Use the LCD display or the device
console to view details.
● Disk Activity: Flashes blue during disk activity. Flashes red if there is a drive error or degraded
drive mode. Off if all drives are removed.
● Power: Flashes white during system startup. Glows solid white when the px2-300d is powered
up and ready.
5. Key lock (front panel side) — Use to secure access to the drive bays.
Hardware Management
140 About the px2-300d Network Storage Components
To Next Page
Loading...
