Managing iSCSI Drives
Adding CHAP User Access to an iSCSI Drive
After you add an iSCSI drive, you create a list of CHAP users that have access to an iSCSI drive. These
users are independent from the users you create on your px2-300d when you enable security. Adding
iSCSI CHAP users does not enable security and does not require any login to allow access to an
iSCSI drive.
1. On the iSCSI page, expand an iSCSI drive, and expand iSCSI CHAP Users to add user access
to an iSCSI drive.
2. Click Add a CHAP user and enter a CHAP username and password.
3. Click Create. Continue adding as many users as needed to access the drive.
4. To delete a user, expand the user section and click Delete.
iSCSI: Creating IP-Based Storage Area Networks (SAN)
46 Managing iSCSI Drives
To Next Page
Loading...
