Page 115
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility
| Selecting SafeStore Encryption Services Security
Options
Figure 70: Confirm Enable Drive Security Screen
14. Click Ye s on the Confirm Enable Drive Security screen to confirm that you want to
enable the drive security settings.
WebBIOS enables the security key ID, security key, and pass phrase (if applicable)
that you entered and returns you to the main menu.
CAUTION: If you forget the security key, you will lose access to your data. Be sure
to record your security key information. You might need to enter the security key to
perform certain operations.
4.7.2 Enabling Drive Security using
EKM
EKM is used for key management when a large number of systems are deployed. You
can automate and manage the life cycle of keys, and also use to unlock configurations.
When you select EKM in Figure66, and click OK, the following dialog box appears.
To Next Page
Loading...
Need help?
General