Page 316
MegaRAID SAS Software User GuideChapter 10: Maintaining and Managing Storage Configurations
| Running a Consistency
Check
— Stop Consistency Check on Error: The RAID controller stops the consistency
check operation if the utility finds an error.
— Continue Consistency Check and Fix Errors: The RAID controller continues the
consistency check if the utility finds and error, and then fixes the errors.
4. Click Ok.
10.2.2 Scheduling a Consistency
Check
Follow these steps to set the properties for a consistency check:
1. Click the Physical tab or Logical tab and select the controller.
2. Click Go To>Controller>Schedule Consistency Check.
The Schedule Consistency dialog box appears, as shown in Figure196.
Figure 197: Schedule Consistency Check Dialog Box
3. Perform the following steps to schedule the consistency check:
a. Select how often to run the consistency check from the drop-down menu.
You can click Advanced for more detailed date options.
b. (Optional) Check the Run consistency check continuously check box.
c. Select the month, day, and year on which to start the consistency check.
d. Select the time of day to start the consistency check.
To Next Page
Loading...
Need help?
General