EasyManua.ls Logo

Lenovo ThinkSystem DS6200 - User Manual

Lenovo ThinkSystem DS6200
159 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ThinkSystem DS Series and DS EXP/D3284
Hardware Installation and Maintenance Guide
Machine Type: 4619/4617/4599/4588/6413

Table of Contents

Questions and Answers

  • L
    Lisa MartinAug 9, 2025
    What to do if Lenovo ThinkSystem DS6200 Storage computer does not recognize the enclosure system?
    • J
      Jennifer BrownAug 9, 2025
      If your computer isn't recognizing the Lenovo Storage enclosure system, there are several things you can check: * Ensure that the interface cables connecting the enclosure to the host computer are correctly fitted. * For 2U enclosures, make sure the LEDs on all installed drive carrier modules are green. For 5U84 enclosures, check that the DDIC Drive Fault LED is not amber. * Confirm that the drive carrier modules are correctly installed. * Check any visible SAS indicators (RBOD, EBOD, and HBA). * Check HBA BIOS for SAS target visibility. * Make sure the operating system driver has been installed correctly.
  • Y
    Yvette MillerAug 17, 2025
    What to do if Lenovo ThinkSystem DS6200 Ops panel Module Fault LED is amber?
    • M
      Mikayla ArroyoAug 17, 2025
      If the Ops panel Module Fault LED on your Lenovo Storage is amber, it indicates a power fault. Verify that the AC mains connections to the PCM are live.
  • M
    Molly PrattAug 25, 2025
    Why Lenovo ThinkSystem DS6200 Ops panel Module Fault LED is amber and Fan Fail LED is illuminated?
    • E
      Elizabeth NguyenAug 25, 2025
      If the Ops panel Module Fault LED is amber and the Fan Fail LED is illuminated on one or more PCMs of your Lenovo Storage, it means the internal temperature exceeds a preset threshold for the enclosure. Verify that the local ambient environment temperature is within the acceptable range. Check the installation for any airflow restrictions at either the front or back of the enclosure. A minimum gap of 25 mm (1") at the front and 50 mm (2") at the rear is recommended. Check for restrictions due to dust build-up and clean as appropriate. Check for excessive re-circulation of heated air from rear to front. It is not recommended to use the enclosure in a fully enclosed rack. If possible, shut down the enclosure and investigate the problem before continuing.
  • J
    Jennifer CampbellSep 1, 2025
    How to fix Lenovo ThinkSystem DS6200 Storage when Fan Fail LED is illuminated on PCM?
    • R
      Rhonda LeeSep 1, 2025
      If the Fan Fail LED is illuminated on the PCM of your Lenovo Storage, it signifies a fan failure. Replace the PCM to resolve this issue.

Summary

Safety Guidelines

Safe Handling

Provides precautions for safely handling and lifting the storage enclosures.

Operation and Electrical Safety

Covers safe operational practices and electrical safety requirements for the enclosures.

Rack System Safety Precautions

Details safety requirements for installing enclosures in a rack, including weight and stability.

System Overview

Enclosure Configurations and Variants

Describes different enclosure types (2U, 5U) and their configurations and variants.

Key Components

Details essential components like Power Cooling Modules (PCMs), PSUs, and FCMs.

Controller and Expansion Modules

Describes IOMs used as controller or expansion modules within the storage system.

Module LEDs and Status Indicators

Disk Drive Modules

Details disk drive carriers, dummy modules, and DDICs used in the enclosures.

Installation

Installation Checklist and Planning

Site Preparation and Enclosure Installation

Covers site requirements, unpacking, tools, and physical installation of enclosures.

Connectivity and Configuration

Guides on connecting enclosures, host systems, and initial configuration tasks.

Operation

Before You Begin

Powering On and Off

Details the procedure for powering the storage system on and off.

Operators Panel LEDs

Disk Drive LEDs

Troubleshooting and Problem Solving

Initial Start-up Problems

Module LEDs and Status

Troubleshooting Specific Enclosures

Fault Isolation Methodology

Explains the systematic approach to identifying and locating system faults.

Module Removal and Replacement

ESD Precautions

Details essential precautions to prevent damage from electrostatic discharge.

CRU Replacement Procedures

Replacing Power Cooling Modules

Replacing Drive Carrier Modules

SFP Option for CNC Ports

Installing SFP Transceivers

Verify Component Operation

Lenovo ThinkSystem DS6200 Specifications

General IconGeneral
Product FamilyThinkSystem
ModelDS6200
Storage TypeHybrid Flash Array
Form Factor2U
Maximum Drive Bays24
RAID Levels Supported0, 1, 5, 6, 10, 50, 60
Power SupplyRedundant hot-swap power supplies
Supported Drive TypesSSD, HDD
Controller TypeDual active/active controllers
Host InterfaceiSCSI, Fibre Channel
ProcessorIntel Xeon processor
Operating System SupportWindows, Linux, VMware
Management SoftwareLenovo Storage Manager

Related product manuals