EasyManua.ls Logo

Lenovo ThinkSystem DS4200 - User Manual

Lenovo ThinkSystem DS4200
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ThinkSystem DS Series and DS EXP/D3284
Hardware Installation and Maintenance Guide
Machine Type: 4619/4617/4599/4588/6413

Table of Contents

Questions and Answers

  • T
    Tammy RoblesAug 9, 2025
    What to do if Lenovo ThinkSystem DS4200 Storage computer does not recognize the enclosure system?
    • S
      susandanielsAug 9, 2025
      If your computer isn't recognizing the Lenovo Storage enclosure system, there are several things you can check: * Ensure that the interface cables connecting the enclosure to the host computer are correctly fitted. * For 2U enclosures, make sure the LEDs on all installed drive carrier modules are green. For 5U84 enclosures, check that the DDIC Drive Fault LED is not amber. * Confirm that the drive carrier modules are correctly installed. * Check any visible SAS indicators (RBOD, EBOD, and HBA). * Check HBA BIOS for SAS target visibility. * Make sure the operating system driver has been installed correctly.
  • C
    Christopher McphersonAug 17, 2025
    What to do if Lenovo ThinkSystem DS4200 Ops panel Module Fault LED is amber?
    • J
      Jose RobertsAug 17, 2025
      If the Ops panel Module Fault LED on your Lenovo Storage is amber, it indicates a power fault. Verify that the AC mains connections to the PCM are live.
  • J
    John GriffinAug 25, 2025
    Why Lenovo ThinkSystem DS4200 Ops panel Module Fault LED is amber and Fan Fail LED is illuminated?
    • E
      Elizabeth MoralesAug 25, 2025
      If the Ops panel Module Fault LED is amber and the Fan Fail LED is illuminated on one or more PCMs of your Lenovo Storage, it means the internal temperature exceeds a preset threshold for the enclosure. Verify that the local ambient environment temperature is within the acceptable range. Check the installation for any airflow restrictions at either the front or back of the enclosure. A minimum gap of 25 mm (1") at the front and 50 mm (2") at the rear is recommended. Check for restrictions due to dust build-up and clean as appropriate. Check for excessive re-circulation of heated air from rear to front. It is not recommended to use the enclosure in a fully enclosed rack. If possible, shut down the enclosure and investigate the problem before continuing.
  • A
    Anna StevensonSep 1, 2025
    How to fix Lenovo ThinkSystem DS4200 when Fan Fail LED is illuminated on PCM?
    • K
      Kathy Holt MDSep 1, 2025
      If the Fan Fail LED is illuminated on the PCM of your Lenovo Storage, it signifies a fan failure. Replace the PCM to resolve this issue.

Summary

Safety guidelines

Safe handling

Provides precautions for safely handling and lifting enclosures and their components.

Electrical safety

Outlines electrical safety requirements for operating 2U and 5U enclosures.

Rack system safety precautions

Details safety requirements for mounting enclosures in racks, including weight and stability.

System overview

Installation

Installation checklist

Outlines the steps for planning, installing, and configuring the enclosure system.

Operation

Powering on;powering off

Details the procedure for powering enclosures on and off, including the correct order of operations.

Troubleshooting and problem solving

Initial start-up problems

Covers common initial problems like faulty power cords and computer not recognizing the enclosure.

Fault isolation methodology

Presents a basic methodology for locating faults and identifying affected CRUs.

Module removal and replacement

CRU replacement for 2 U chassis

Details procedures for replacing CRUs in 2U12 and 2U24 chassis.

Replacing a DDIC

Describes the procedures for removing and installing Disk Drive in Carrier (DDIC) modules.

Technical specifications

USB device connection

Lenovo ThinkSystem DS4200 Specifications

General IconGeneral
BrandLenovo
ModelThinkSystem DS4200
CategoryStorage
LanguageEnglish

Related product manuals