EasyManua.ls Logo

Lenovo ThinkSystem DM5000 series - User Manual

Lenovo ThinkSystem DM5000 series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ThinkSystem DM3000x and DM5000x
Hardware Installation and Maintenance Guide
Machine Types: 7Y41, 7Y42, and 7Y57

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Lenovo ThinkSystem DM5000 series and is the answer not in the manual?

Lenovo ThinkSystem DM5000 series Specifications

General IconGeneral
BrandLenovo
ModelThinkSystem DM5000 series
CategoryStorage
LanguageEnglish

Summary

Chapter 1. Introduction

Specifications

Summarizes system specifications including dimensions, clearance, weight, processor, and DIMM details.

Chapter 3. Rail kit installation instructions

DM;DE Series 2 U24, 3 U, 4 U rail kit installation instructions

Provides steps for installing rail kits in square-hole and round-hole four-post racks.

DM;DE Series 2 U12 rail kit installation instructions

Details the installation of rail kits for 2U 12-drive enclosures in four-post racks.

Chapter 4. System installation and setup

Installation and setup high-level workflow

Outlines the overall process for system installation and configuration.

Cabling a two-controller switchless cluster, unified network configuration

Guides on cabling cluster interconnect, UTA2 data, and management ports.

Cabling a two-controller switchless cluster, Ethernet network configuration

Details cabling for cluster interconnect, Ethernet data, and management ports.

Cabling a switched cluster, unified network configuration

Explains cabling for cluster interconnect, UTA2 data, and management ports.

Cabling a switched cluster, Ethernet network configuration

Describes cabling for cluster interconnect, Ethernet data, and management ports.

Completing system setup and configuration

Details steps for client configuration, setting shelf IDs, and powering on the system.

Chapter 5. Hardware replacement procedures

Hot-swapping an internal disk drive

Provides steps for safely replacing a failed disk drive while the system is running.

Replacing the caching module

Details the procedure for replacing a faulty caching module to maintain performance.

Replacing the NVMEM battery

Guides on how to replace the NVMEM battery within the controller module.

Replacing the controller module

Covers the steps for replacing a controller module, including component transfer.

Replacing a DIMM

Details the procedure for replacing a DIMM due to correctable ECC errors.

Replacing the chassis

Outlines the process for replacing the entire system chassis.

Chapter 6. Upgrading controller hardware

Chapter 7. System level diagnostics

Related product manuals