Table 3. Events organized by severity (continued)
Event ID
Message String Severity
FQXSFPU0023I Secure Boot Image Verification Failure has been cleared as no failure
in this round boot.
Informational
FQXSFPU4034I TPM Firmware recovery is finished, rebooting system to take effect. Informational
FQXSFPU4038I TPM Firmware recovery successful. Informational
FQXSFPU4041I TPM Firmware update is in progress. Please DO NOT power off or
reset system.
Informational
FQXSFPU4042I TPM Firmware update is finished, rebooting system to take effect. Informational
FQXSFPU4044I The current TPM firmware version could not support TPM version
toggling.
Informational
FQXSFPU4046I TPM Firmware will be updated from TPM1.2 to TPM2.0. Informational
FQXSFPU4047I TPM Firmware will be updated from TPM2.0 to TPM1.2. Informational
FQXSFPU4049I TPM Firmware update successful. Informational
FQXSFPU4080I Host Power-On password has been changed. Informational
FQXSFPU4081I Host Power-On password has been cleared. Informational
FQXSFPU4082I
Host Admin password has been changed. Informational
FQXSFPU4083I
Host Admin password has been cleared. Informational
FQXSFPU4084I
Host boot order has been changed. Informational
FQXSFPU4085I Host WOL boot order has been changed. Informational
FQXSFSM0007I The XCC System Event log (SEL) is full. Informational
FQXSFSR0002I [arg1] GPT corruption recovered, DiskGUID: [arg2] Informational
FQXSFDD0001G DRIVER HEALTH PROTOCOL: Missing Configuration. Requires
Change Settings From F1.
Warning
FQXSFDD0002M DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller. Warning
FQXSFDD0003I DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
Warning
FQXSFDD0005M DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires
'Reboot'.
Warning
FQXSFDD0006M DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.
Warning
FQXSFDD0007G Security Key Lifecycle Manager (SKLM) IPMI Error. Warning
FQXSFPU0021G
Hardware physical presence is in asserted state. Warning
FQXSFPU0022G The TPM configuration is not locked. Warning
FQXSFPU0023G Secure Boot Image Verification Failure Warning.
Warning
FQXSFPU4033F TPM Firmware recovery is in progress. Please DO NOT power off or
reset system.
Warning
FQXSFPU4035M TPM Firmware recovery failed. TPM chip may be damaged. Warning
FQXSFPU4040M TPM selftest has failed. Warning
FQXSFPU4043G TPM Firmware update aborted. System is rebooting... Warning
126 ThinkSystem SR250 Messages and Codes Reference
To Next Page
Loading...
