The following table lists the network adapters that are supported with the SR250 server.
Table 26. Network adapters
Description Part number
Feature
code
Maximum
quantity
I/O slots
supported
PCIe Low Profile adapters - 1 Gb Ethernet
Broadcom 5720 1GbE RJ45 2-Port PCIe Ethernet Adapter 7ZT7A00482 AUZX 2 1, 2
Broadcom 5719 1GbE RJ45 4-Port PCIe Ethernet Adapter 7ZT7A00484^ AUZV^ 2 1, 2
ThinkSystem I350-F1 PCIe 1Gb 1-Port SFP Ethernet Adapter 7ZT7A00533 AUZZ 2 1, 2
ThinkSystem I350-T2 PCIe 1Gb 2-Port RJ45 Ethernet Adapter 7ZT7A00534 AUZY 2 1, 2
ThinkSystem I350-T4 PCIe 1Gb 4-Port RJ45 Ethernet Adapter 7ZT7A00535 AUZW 2 1, 2
PCIe Low Profile adapters - 10 Gb Ethernet
Broadcom 57416 10GBASE-T 2-Port PCIe Ethernet Adapter 7ZT7A00496 AUKP 2 1, 2
Emulex VFA5.2 2x10 GbE SFP+ PCIe Adapter 00AG570 AT7S 2* 1, 2
Emulex VFA5.2 2x10 GbE SFP+ Adapter and FCoE/iSCSI SW 00AG580 AT7T 2* 1, 2
Intel X550-T1 Single Port 10GBase-T Adapter 00MM850 ATRY 2 1, 2
Intel X550-T2 Dual Port 10GBase-T Adapter 00MM860 ATPX 2 1, 2
Intel X710-DA2 PCIe 10Gb 2-Port SFP+ Ethernet Adapter 7ZT7A00537 AUKX 2* 1, 2
Intel X710-T4 PCIe 10Gb 4-Port Base-T Adapter 7XC7A05927 B0X1 2 1, 2
QLogic QL41134 PCIe 10Gb 4-Port Base-T Ethernet Adapter 4XC7A08225 B31G 2 1, 2
PCIe Full Height adapters - 10 Gb Ethernet
Emulex OCe14104B-NX PCIe 10Gb 4-Port SFP+ Ethernet Adapter 7ZT7A00493 AUKN 1* 2
Intel X710-DA4 PCIe 10Gb 4-Port SFP+ Ethernet Adapter 7XC7A05525 B0YL 1* 2
PCIe Low Profile adapters - 25 Gb Ethernet
Broadcom 57412 10/25GbE SFP28 1-Port PCIe Ethernet Adapter 7ZT7A00505 AUKS 2* 1, 2
Intel XXV710-DA2 10/25GbE SFP28 2-Port PCIe Ethernet Adapter 7XC7A05523 B0WY 2* 1, 2
Mellanox ConnectX-4 Lx 10/25GbE SFP28 2-Port PCIe Eth. Adapter 01GR250 AUAJ 2* 1, 2
QLogic QL41262 10/25GbE SFP28 2-Port PCIe Ethernet Adapter 4XC7A08228 B21R 2* 1, 2
^ Field upgrade option only; no factory installation.
* The adapter comes without transceivers or cables; for ordering information, see the configuration notes below the table.
Configuration notes:
PCIe full-height network adapters are supported in the full-height PCIe slot 2 supplied by the PCIe x8 or
x16 riser card.
PCIe Low Profile network adapters are supported in the full-height and low profile slots supplied by the
PCIe x8 or x16 riser card.
Supported transceivers or DAC cables should be purchased for the SFP+ and SFP28 adapters,
and UTP Category 6 or Category 5e cables should be purchased for the 10 GbE (Cat6) or 1
GbE (Cat5e or Cat6) RJ-45 adapters. The maximum number of transceivers or cables that are supported
per adapter equals the quantity of the adapter ports, and all adapter ports must have the same type of
the transceiver or cable selected.
The following transceiver and cables can be purchased:
UTP cables for 10 GbE and 1 GbE RJ-45 adapters
Transceivers and cables for 10 GbE SFP+ adapters
Transceivers and cables for 25 GbE SFP28 adapters
To Next Page
Loading...
