Components and connectors
The following figure shows the front of the SR250 server with four 3.5-inch drive bays.
Figure 2. Front view of the SR250: 4x 3.5-inch drive bays
The following figure shows the front of the SR250 server with eight 2.5-inch drive bays.
Figure 3. Front view of the SR250: 8x 2.5-inch drive bays
The following figure shows the front of the SR250 server with ten 2.5-inch drive bays.
Figure 4. Front view of the SR250: 10x 2.5-inch drive bays
The front of the SR250 server includes the following components:
Drive bays:
4x 3.5-inch (Large Form Factor [LFF]) SATA simple-swap; or
4x 3.5-inch SAS/SATA hot-swap; or
8x 2.5-inch (Small Form Factor [SFF]) SAS/SATA hot-swap; or
10x 2.5-inch hot-swap drive bays:
10x SAS/SATA
8x SAS/SATA and 2x NVMe PCIe
One VGA port (optional)
One USB 2.0 port with XClarity Controller access
One USB 3.1 Gen 1 port
A Power button
Status LEDs
To Next Page
Loading...
