Table 17. Parts list (continued)
Index
Description
Tier 1 CRU Tier 2 CRU FRU
Consumable
and structural
parts
23
CMOS battery
√
24
M.2 drive backplane
√
25
M.2 drive
√
26
M.2 retainer clip
√
27
Standard air baffle filler
√
28
Standard air baffle
√
29
Memory module
√
30
2U standard heat sink
√
31
T-shape performance heat sink
√
32
Processor
√
33
Processor filler
√
34
Processor board
√
35
System I/O board
√
36
Firmware and RoT security
module
√
37
PCIe adapter
√
38
Riser 3 cage (2FH)
√
39
Riser 1 or riser 2 cage (3FH)
√
40
Riser 3 card (2FH)
√
41
Riser 1 or riser 2 card (3FH)
√
Power cords
Several power cords are available, depending on the country and region where the server is installed.
To view the power cords that are available for the server:
1. Go to:
http://dcsc.lenovo.com/#/
2. Click Preconfigured Model or Configure to order.
3. Enter the machine type and model for your server to display the configurator page.
4. Click Power ➙ Power Cables to see all line cords.
Notes:
• For your safety, a power cord with a grounded attachment plug is provided to use with this product. To
avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
• Power cords for this product that are used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
Chapter 3. Parts list 47
To Next Page
Loading...
