2. Resolve DIMM configuration so that the PMEM ratio meets firmware requirements, then reboot the
system.
Service Action:
Complete the following steps:
1. Review User Actions and confirm that memory configuration rules are being followed.
2. If problem persists, escalate to next level of support.
• FQXSFMA0042K: Intel Optane PMEM is not supported by processor of this system.
Severity: Error
User Action:
Validate system’s memory configuration by using the memory configuration tool below: https://dcsc.
lenovo.com/#/memory_configuration.
Service Action:
Complete the following steps:
1. Review User Actions and confirm that memory configuration rules are being followed.
2. If problem persists, escalate to next level of support.
• FQXSFMA0046I: DIMM [arg1] is disabled because it is Intel Optane PMEM that is not supported on
current platform
Severity: Info
User Action:
Complete the following steps:
1. Power off the system.
2. Reconfig the Intel Optane PMEM.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
Service Action:
Information only; no action is required.
• FQXSFMA0046M: DIMM [arg1] is disabled because it is Intel Optane PMEM that is not supported
on current platform
Severity: Error
User Action:
Complete the following steps:
1. Power off the system.
2. Remove the unsupported Intel Optane PMEM from this system.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
Chapter 3. UEFI events 217