User Action:
Information only; no action is required.
Service Action:
n/a
• FQXPMEM0004I: Launching diagnostic program
Severity: Info
User Action:
Information only; no action is required.
Service Action:
n/a
• FQXPMEM0005I: boot diagnostic program success
Severity: Info
User Action:
Information only; no action is required.
Service Action:
n/a
• FQXPMEM0006M: Unable to locate diagnostic firmware image
Severity: Error
User Action:
1. Restart BMC via supported method and reboot the system.
2. Perform AC reset or virtual reseat.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on
AC. After AC power is restored, power on the host system.
3. If the problem persists, please contact technical support.
Service Action:
1. Review PD Steps.
2. Load the XCC settings to defaults.
3. Reflash XCC firmware.
4. Reflash entire EMMC with offline image.
5. If problem persists, escalate to next level of support
• FQXPMEM0007M: Diagnostic image cannot be launched as "Console Redirection" is enabled
Severity: Error
User Action:
Chapter 4. XClarity Provisioning Manager events 251