Lenovo ThinkSystem ST650 V3 - Mechanical Specifications

Minimal configuration for debugging
Minimal configuration for debugging
• One processor in processor socket 1 (processor TDP smaller than 200 watts)
• One DRAM DIMM in DIMM slot 10
• One power supply unit in PSU slot 1
• One drive with RAID adapter and backplane (if OS is needed for debugging)
• Three single rotor fans in fan slots 1, 2, and 4, and one fan filler in fan slot 3
Operating systems
Operating systems
Supported and certified operating systems:
• Microsoft Windows Server
• VMware ESXi
• Red Hat Enterprise Linux
• SUSE Linux Enterprise Server
References:
• Complete list of available operating systems:
https://lenovopress.lenovo.com/osig.
• OS deployment instructions, see
“Deploy the operating system” on page 63.
Mechanical specifications
Summary of the mechanical specifications of server. Depending on the model, some features might not be
available, or some specifications might not apply.
Dimension
4U server
• Height:
– Without foot stand: 448 mm (17.64 inches)
– With foot stand: 461.4 mm (18.17 inches)
• Width:
– Without foot stand: 174.2 mm (6.86 inches)
– With foot stand: 247.4 mm (9.74 inches)
• Depth:
– Without security door: 710.8 mm (27.98 inches)
– With security door: 733.8 mm (28.89 inches)
Weight
• 2.5-inch drive configuration
– Maximum: 40.21 kg (88.647 lb)
• 3.5-inch drive configuration
– Maximum: 42.735 kg (94.214 lb)
10 ThinkSystem ST650 V3 System Configuration Guide